USB 3.2 Cloner and Dock for M2 + NVMe + SATA Sandberg
USB 3.2 Cloner and Dock for M2 + NVMe + SATA
Цена 133.99 BGN
Препоръчителна цена на препродажба без ДДС:   111.66 BGN

Артикул №: 136-49
EAN: 5705730136498

Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA ви предлага лесна външна връзка от традиционния SSD вид и NVMe M.2 SSD 3.5"/2.5" SATA твърди дискове в редица размери. Поставете вашия диск в тази удобна малка докинг станция, за да избегнете употребата на всякакви кутии и винтове. Тя се свързва лесно с вашия компютър чрез USB-A или USB-C порт и започва да работи незабавно. С интерфейс USB 3.2 получавате скорости за бърз трансфер до 10 Gbps. Можете също да клонирате съдържанието на един твърд диск върху друг изцяло без необходимост от връзка с компютър. Функцията за клониране работи двупосочно.

Clone and dock in one
Instant hard disk cloning
2 hard disks to a single USB port


New Tek Reviews:

»After playing around with this Sandberg’s USB 3.2 Cloner and Dock for M2 + NVMe enclosure for a couple of weeks and installing a three different drives on three different operating systems, I can say it passes my inspection and is a very well made device. We were even able to image a loaded drive to another system using third-party software (Acronis True Image) and make that system bootable. That is to say, the USB 3.2 Cloner and Dock for M2 + NVMe enclosure does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

Practical Electronics:

»I've tried it and certainly love it. I just wish I hadn't previously wasted my money on a multi-bay HDD dock that looks good but has corrupted some of my HDDs, and also on two-bay HDD docks, which are far less use than the much neater Sandberg tool.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Gameelite:

»Sandberg's new docking station can not only copy data but also clone SATA and M.2 disks. Easy to use. Suitable for both cloning and backup. Fairly low price.«

The Fox Report:

»I've tried it and certainly love it. «

Newtekreviews.com:

»It passes my inspection and is a very well made device. The item does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Datormagazin:

»The solution is extremely easy to use and works perfectly.«

  • Support offline clone:
  • (1)3.5"/2.5" SATA to NVMe M.2
  • (2)NVMe M.2 to 3.5"/2.5" SATA
  • USB3.2 Gen2 superspeed up to 10Gbps (backward compatible with older standards)
  • Transfer speed max: SATA 6 Gpbs, M.2/NVMe 10 Gpbs
  • SSD types supported: M.2, NVMe, M Key
  • SSD sizes supported: 2230 / 2240 / 2260 / 2280
  • Chipset: JMS581D
  • LED indicator for power and data access
  • Offline clone, two-way clone (NVMe to SATA, SATA to NVMe)
  • Max. capacity supported 3.5" HDD: 24TB
  • Max. capacity supported 2.5" HDD: 8TB
  • Max. capacity supported SSD: 4TB
  • Max. capacity supported M.2: 4TB

Съвместим със:

  • Windows 11
  • Windows 10
  • Windows 8
  • Windows 7
  • MacOS
  • Linux

Информация за опаковане

  • 1 Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA
  • 1 Power Supply output DC 12V/3A, input 230V AC, EU connector
  • 1 USB-C to USB-A/C connecting cable, 80 cm
  • 1 Quick guide
Info

Размери

Продукт Опаковка
Височина 10.84 cm 13.5 cm
Широчина 2.41 cm 16.9 cm
Дълбочина 4.43 cm 5.5 cm
Тегло 100 g 120 g
136-49 USB 3.2 Cloner and Dock for M2 + NVMe + SATA

Свържете се с Помощния център на Sandberg

Ако не намерите отговори на въпросите си за Вашия продукт, моля, свържете се с Помощния център на Sandberg, за да получите бърз отговор в делничните дни:

FAQ

When I try to clone SATA to NVMe or vice versa by holding the clone button down for 3 seconds, all 4 percentage LEDs start to flash a lot, but then it's as if nothing happens. There is no indication that cloning has started.

Hold the clone button down for 3-5 seconds and release once all LEDs are on (25%, 50%, 75%, 100%). Press the button quickly once more and cloning will start. Once all LEDs have gone out again, cloning is complete. Remember to switch off the cloner before disconnecting HDD/SSD.

Видеозаписи
Деактивирано, ако не се съгласите с {групи_бисквитки}.

Бюлетин